Stylus Mechanical ModClone from SubTwo (900 BF Styled Mechanical Mod) Stylus Mechanical Mod, aka «900 BF Styled Mechanical Mod» (on trading places)
The mod comes in a simple cardboard box with a funny typo «166500»: Two tubes — 64 and 79 mm (for 16500 and 16650 batteries, respectively) with a wall thickness of slightly more than 0.6 mm. On the one hand the thread for fixing the 510 connector: Threads are made well, without sharp edges. On the other side of the tube in the place of fastening buttons — smooth surface: 510 connector. It is possible to adjust the height of the battery within a small range: Brass pin allows you to adjust the tank height: In a circle — engraving «The Vaping Gentelmen Club» and pseudo-serial number The bueaty ring is worn on top. This ring is made of colorfull plastic (horn on original): Bottom button: Button color is different from the beauty ring: The button is attached to the cavity of the mod is not on the thread, as usual, and is held by the sealing o-ring: It is necessary to pay tribute, the button is fixed very densely, at least with a new o-ring, probably over time and will become loose. It will be a pity if this happens, because it is more convenient to change the battery by removing the button, so as not to knock down the connector setting. Button stroke is easy and soft, without jamming. Constuction is very simple: There is no lock, only the difference in the flatness saves from accidental clicks. By default, the screw cap with 1mm under the battery with the protruding pin, for batteries with flat pin is necessary to put the screw from the cap of 2mm: I installed the oring 13H1,5 under plastic insulator to raise the insulator over the screw higher: Summary:Pretty well done clone. Lightweight, compact and allows the use of batteries large enough for its power size, plus a big set of suitable tanks here. 2019 © Vides |